Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

160 Fabric Manager Administrator’s Guide
53-10000610-02
Port configuration
11
5. Click OK to save your settings.
Port configuration
NOTE
Port configuration is not supported for ICL port types in Fabric Manager or Web Tools.
You use the Web Tools Port Management module (Figure 102) to perform the basic port
configuration procedures. From the Port Management module, you can:
• Configure port type and speed
• Assign a name to a port
• Disable a port over reboots
• Enable or disable a port
• Swap ports
For more information on the Port Management module and performing these tasks, see the Web
Tools Administrator’s Guide.
To configure ports, right-click a port in the Detail Information panel and select Port Configuration
from the context menu.
FIGURE 102 Web Tools Port Management module