Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

170 Fabric Manager Administrator’s Guide
53-10000610-02
Replicating configurations
11
Replicating a switch SNMP configuration
1. Select the switch.
2. Select Tasks > Switch Configuration Management > Replicate Configuration.
3. Choose to SNMP Configuration to launch the Replicate SNMP Configuration wizard, as shown
in Figure 110. Click Next to continue.
FIGURE 110 Replicating the SNMP configuration
4. Choose the source that you want to replicate. You can use a file, another switch, or the Fabric
Manager Repository. Click Next to continue.
5. Depending on the source type you chose, enter (or select) the information and click Next.
6. Select the destination switch. This is the switch you want to replicate to. Click Next.
7. Click Replicate to begin the process.
Replicating a switch Fabric Watch configuration
1. Select the switch.
2. Select Tasks > Switch Configuration Management > Replicate Configuration.
3. Choose Fabric Watch Configuration to launch the Fabric Watch Configuration wizard, as shown
in Figure 111. Click Next to continue.