Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

188 Fabric Manager Administrator’s Guide
53-10000610-02
Access Control List management
13
FIGURE 121 Web Tools Admin Domain module
Access Control List management
For switches running Fabric OS v5.2.x and later, you can create and activate Switch Connection
Control (SCC) and Device Connection Control (DCC) policies in the base Fabric OS that are
functionally equivalent to the SCC and DCC policies supported in Secure Fabric OS.
In Secure Fabric OS, these polices are fabric-wide. In the base Fabric OS (for Fabric OS v5.2.x and
later), these polices are switch-based; however, you can distribute these policies to all switches in
the fabric.
To manage the Access Control List (ACL) policies, the following requirements must be met:
• You can select only one switch at a time.
• The switch must be running Fabric OS v5.2.x or later.
• Security must not be enabled on the fabric.
• Your user account must have either the Admin or Fabric Admin role for ACL management.
Fabric Manager launches Web Tools to manage the ACL policies. The following procedure describes
how to launch the Web Tools Switch Admin module from Fabric Manager. See the Web Tools
Administrator’s Guide for additional instructions on configuring the SCC and DCC policies.