Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

Fabric Manager Administrator’s Guide 195
53-10000610-02
Work with iSCSI information
14
FIGURE 127 iSCSI tab, iSCSI Initiators view
iSCSI targets
The iSCSI Targets tab, shown in Figure 128, lists all iSCSI targets (virtual targets) in the SAN, fabric,
or switch. You can filter the list based on iSCSI target name (IQN) and FC target name. This tab is
disabled in the switch context because virtual targets are fabric-wide entities.
FIGURE 128 iSCSI tab, iSCSI Targets view
If an iSCSI target is created from LUNs of multiple FC devices, there are multiple entries for that
iSCSI target corresponding to each FC device. If an iSCSI target has multiple LUN configurations
from a single FC device, there is only one entry for that iSCSI target.
The state of the iSCSI target is offline if any of the FC devices that are part of the iSCSI target are
offline.
Editing an iSCSI target
Right-click the target in the table and click Configure iSCSI Targets in the context menu.