Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

200 Fabric Manager Administrator’s Guide
53-10000610-02
Determine the availability of firmware-specific features
15
Performance Monitoring (port
statistics)
X X X XXXXX
5
XX
Performance Monitoring
(end-to-end)
6
X X X XXXXX
5
XX
QuickLoop
7
XXX X XX
Fibre Channel Router X X X X X X
FCIP X X X X X
Change Management
configuration checking
8
XXX X X
supportShow information in Fabric
Manager
X X X XXXXXX X X
supportSave information in Fabric
Manager
XXX X
Replicate authentication,
authorization, and accounting
(AAA) configuration
X X X XXXX
Role-based access control (RBAC) X X X X
Administrative Domains X X X X
Offline zone management
9
X X X XXXX
iSCSI management X X X X
ACL management X X X X
Trace Route
10
XXX X
1. XPath OS v7.1.2c or later is required for LSAN view support.
2. Topology/ISL monitoring is supported on Fabric OS v2.6.0k or later and Fabric OS v3.0.2k or later.
3. Running Fabric OS v4.1.2 or later.
4. All switches in the fabric must be running Fabric OS v5.2.0 or later.
5. Performance Monitoring port statistics return incorrect values for Fabric OS v4.x to 4.2.0b. Firmware versions v4.2.0c or later work correctly.
6. The seed switch must be running Fabric OS v3.x/4.x or later for End-to-End Performance Monitoring to be enabled.
7. The QuickLoop feature can be implemented only on switches running Fabric OS v2.x/3.x; however, when using a seed switch running Fabric OS v4.x,
you can see the Fabric OS v2.x/3.x switches in QuickLoops.
8. If a fabric has a switch running firmware versions 2.6.x or earlier, 3.0 or earlier, or XPath OS v7.1.0, Change Management switch configuration checking
is not supported. Fabric Manager uses one switch in the fabric to collect security policy information through the API. Fabric Manager cannot collect security
policy information for a fabric if the switch it selects is running firmware versions 2.6.x or earlier, 3.0 or earlier, or XPath OS v7.1.0 because the API does not
support those versions of firmware or that switch type.
9. The seed switch must be running Fabric OS v4.4.0 or later or Fabric OS v5.0.0 or later.
10. At least one switch in the trace route must be running Fabric OS v5.2.0 or later.
TABLE 19 Firmware-specific features (Continued)
Feature Fabric OS XPath
OS
6.1.0 6.0.0 5.3.x 5.2.x 5.1.x 5.0.x 4.4.x 4.2.x 4.1.x 4.0.x 3.1.x/
3.2.x
3.0.x 2.6.x 7.3.x/
7.4.x