Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

Fabric Manager Administrator’s Guide 207
53-10000610-02
File transfer options configuration
15
The File Transfer dialog box displays, as shown in Figure 138.
FIGURE 138 Options (file transfer)
3. Configure your FTP server using one of the following procedures:
If you are using the FTP server built-in with Fabric Manager:
a. Click Use built-in FTP Server.
b. If you do not want to use the default user name and password, click Use my user name
and password.
i. Type your user name in the User Name field.
ii. Type your password in the Password field and confirm it in the Confirm Password field.
If you are using an external FTP server:
a. Click Use External FTP Server.
b. Type the IP address of your FTP server in the Remote Host IP field.
c. Type your login name in the Remote User Name field.
d. Type a default FTP directory in the Remote Directory Path field. Do not enter a file name,
only a directory.
Note the following requirements when the external FTP server is running on the same
system as the Fabric Manager server:
• The firmware repository is always created at the FTP root directory of the external FTP
server regardless of the directory specified in the Remote Directory Path field.
• The FTP root directory must have write access.
e. Choose File Transfer Protocol(ftp) from the Select Protocol menu.
f. Type your password in the Password Required for FTP field.