Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

246 Fabric Manager Administrator’s Guide
53-10000610-02
Security policy settings
18
FIGURE 159 Configuring the FCS policy
3. Select a switch from the Available Switch List and complete the appropriate following action for
the task you want to complete:
• To add the switch to the FCS Switch List, click Add FCS.
• To add all of the switches in the current fabric simultaneously, click Add All.
• To add a switch that is not listed in the Available Switch List, click Add Others, type the
WWN of the switch you want to add, and click Add.
• To remove a switch from the FCS policy, select the switch from the FCS Switch List, then
click Remove FCS.
• To rearrange the order of the switches in the FCS Switch List use the up and down arrow
keys to shift a switch up or down the list. The primary FCS switch is the first switch in the
list and is also identified with a star icon next to it.
You may have to resize the Secure Fabric Editor screen to see the star that appears to the
right of the primary FCS, as in Figure 159.
NOTE
Changing the primary FCS causes updates in the fabric that might take time to complete,
depending on the fabric size.
4. Click the Summary tab.
5. Click Save to save your changes but not apply them, or click Activate to save and apply your
changes.
The Security Policy Review dialog box displays.
6. After reviewing the Security Policy, click one of the following:
• Continue (to continue applying changes or to save your changes)
• Cancel (to cancel your changes)