Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

Fabric Manager Administrator’s Guide 247
53-10000610-02
Security policy settings
18
• Copy to File (to copy the Security Policy to a file)
SCC policy options configuration
The SCC policy defines all switches in the secure fabric (FCS and non-FCS). You cannot add a new
switch to a secure fabric without adding the switch to the SCC policy. SCC policies are created
automatically in Fabric Manager when you enable secure mode on a fabric.
Configuring or edit the SCC policy
1. In the Information panel, right-click the secure fabric for which you want to set policies and
choose Security > Security Policy Editor from the context menu.
The Policy Editor appears (see Figure 158 on page 244).
2. Click the SCC tab (see Figure 160).
All current switches in the fabric display in the Available Switches list.
FIGURE 160 Configuring the SCC policy
3. Complete the following appropriate action for the task you want to perform:
• To add a switch you want to include in the SCC policy, select a switch and click Add Switch
• To add all switches from the fabric into the policy, click Add All.
• To add a switch that is not listed in the Available Switch list, click Other, type the WWN of
the switch you want to add, and click Add.
NOTE
All switches within a fabric must be included in the SCC policy; any excluded switches segment
out into their own fabric.