Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

250 Fabric Manager Administrator’s Guide
53-10000610-02
Security policy settings
18
6. Complete the following appropriate action for the task you want to perform:
• To add a switch to the policy, click Add IP. The IP address is placed in the Permitted Access
Points list.
• To remove a switch from the policy, select the IP address from the Permitted Access Points
list, then click Remove IP.
• To delete the policy, click Delete Policy.
7. Select the Summary tab.
8. Click Save to save your changes but not apply them, or click Activate to save and apply your
changes.
The Security Policy Review dialog box displays.
9. After reviewing the Security Policy, click one of the following:
• Continue (to continue applying or to save your changes)
• Cancel (to cancel your changes)
• Copy to File (to copy the Security Policy to a file)
DCC policy options configuration
You can configure DCC policies to bind device ports to specific switch ports. With Fabric Manager,
you can create and configure multiple DCC policies with unique names and populate DCC policies
with switch and device WWNs.
Creating a DCC policy
1. In the Information panel, right-click the secure fabric for which you want to set policies and
choose Security > Security Policy Editor from the context menu.
The Policy Editor appears (see Figure 158 on page 244).
2. Click the DCC tab (see Figure 162 on page 251).