Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

254 Fabric Manager Administrator’s Guide
53-10000610-02
Security policy settings
18
The selected policy appears (see Figure 163).
3. Perform the appropriate following action based on the action you want to perform:
• To add a device to the policy, select the device in the Available Access Points list, then click
Add Device.
• To remove a device from the policy, select the device in the Permitted Access Points list,
then click Remove Device.
4. Click the Summary tab.
5. Click Save to save your changes but not apply them, or click Activate to save and apply your
changes.
The Security Policy Review dialog box displays.
6. After reviewing the Security Policy, click one of the following:
• Continue (to continue applying changes or to save your changes)
• Cancel (to cancel your changes)
• Copy to File (to copy the Security Policy to a file)
Serial and Front Panel policy options configuration
Create a Serial or Front Panel policy to grant serial port or front panel access to specific switches.
ATTENTION
If you create policies without Fabric Manager client/server IP addresses, or if you create empty
Serial, Telnet, HTTP, and API policies simultaneously, then you will suddenly be unable to manage
security and the switch.
Creating a serial or front panel policy
1. In the Information panel, right-click the secure fabric for which you want to set policies and
choose Security > Security Policy Editor from the context menu.
The Policy Editor appears (see Figure 158 on page 244).
2. Click the tab that corresponds to the policy you want (Serial or Front Panel).
The selected policy appears (see Figure 164 on page 255). The Serial policy is used in this
example; the Front Panel policy is similar.