Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

Fabric Manager Administrator’s Guide 255
53-10000610-02
Security policy settings
18
FIGURE 164 Configuring the Serial policy
3. Click Create Policy.
You have now created an empty policy, which denies Serial and Front Panel access from all
hosts to all switches in the fabric.
ATTENTION
If you create policies without Fabric Manager client/server IP addresses,
or...
If you create empty Serial, Telnet, HTTP, and API policies simultaneously,
then...
You cannot manage security in the switch or on the secure fabric.
4. (Optional) Click Name, IP, or WWN to change how the switches are displayed in the Available
Access Points list.
5. Select a switch in the Available Access Points list and click Add Switch to add it to your policy.
Repeat this step for each switch that you want to add, or hold the CTRL key while selecting
multiple switches to add simultaneously.
6. Click the Summary tab.
7. Click Save to save your changes but not apply them, or click Activate to save and apply your
changes.
The Security Policy Review dialog box displays.
8. After reviewing the Security Policy, click one of the following:
• Continue (to continue applying changes or to save your changes)
• Cancel (to cancel your changes)