Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

Fabric Manager Administrator’s Guide 263
53-10000610-02
Current port connectivity configuration
19
• Modify port names
Other activities include:
• Analyze zone conflicts
• Activate the current configuration
• Refresh current information
• Save the current configuration for later use
If you save the configuration for future use, see “Stored port connectivity configuration” on
page 265 for the activation procedure.
NOTE
You can activate the current port connectivity configuration only for FMS-enabled switches running
Fabric OS v4.4.0 or later.
Users with roles of user or basicswitchadmin can only view the port connectivity configuration. Users
with the role of zoneadmin cannot access the port connectivity configuration. All other user roles can
view and modify the port connectivity configuration.
Editing the current port connectivity configuration
1. In the View panel or Information panel, right-click a switch that has FMS mode enabled and
select PDCM Management > Active from the context menu.
The Edit FICON CUP Port Connectivity Configuration dialog box displays (see Figure 167). Any
modified values are indicated with a blue background.
Some cells for the Brocade 24000 and 48000 directors and Brocade DCX are disabled:
• For Brocade 24000, disabled cells are those with 7E in the Area ID column or 10/14 in the
Port column.
• For Brocade 48000, disabled cells are those with FE or FF in the Area ID column or 10/30
in the Port column.
• For Brocade DCX, disabled cells are those with FE or FF in the Area ID column or 12/30 in
the Port column.