Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

Fabric Manager Administrator’s Guide 283

53-10000610-02

FC Router information

FIGURE 180 Expanded LSAN Zone Information

3. Optional: Select an LSAN and click Modify LSAN. This launches the Share Devices wizard,

which allows you to add or remove devices from the LSAN.

4. Optional: Select an LSAN and click Delete LSAN to delete the LSAN from the selected fabric.

NOTE

The Modify and Delete buttons are enabled only for users with the Admin, Fabric Admin, or Zone

Admin roles.

Displaying virtual devices

Select Show virtual device nodes in the Scope panel.

The topology view shows the device nodes for the imported devices, according to the LSAN

zone that is selected.

You cannot select this feature if no backbone fabrics or no LSAN zones are available.

FC Router information

The FCR Switches tab within the MetaSAN view displays information about FC Routers. This view is

available only for backbone fabrics containing FC Routers.

The FCR Information provides details on the following three tabs:

• Physical Device Ports

This tab displays all the device ports shared from the edge fabrics connected to the selected

FC Router through EX_Ports. The devices displayed here are only those devices that are

physical to the edge fabrics connected to the FC Router. Using Figure 181 as an example, the

Physical Devices tab would show Host 1 on Edge Fabric 1 for FC Router 1, and would show

Target 2 on Edge Fabric 2 for FC Router 2.

• Proxy/Virtual Device Ports

This tab displays all the devices shared from the edge fabrics connected to the selected FC

Router through EX_Ports and to which other edge fabrics these devices are virtual. Using

Figure 181 as an example, the Virtual Devices tab would show Proxy Host 1 on Edge Fabric 2

for FC Router 1, and would show Proxy Target 2 on Edge Fabric 1 for FC Router 2.

• LSAN Information for FCR

This tab displays LSAN zones from the edge fabric connected to the FC Router and the member

devices of LSAN zones that are attached to the edge fabrics connected to the selected FC

Router.