Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

284 Fabric Manager Administrator’s Guide
53-10000610-02
FC Router information
20
FIGURE 181 Backbone fabric with multiple FC Routers
NOTE
In the Information Panel of a single FC Router, the information displayed in the Physical and Virtual
Devices tabs varies from what is displayed in the CLI commands. For example, the fcrproxydevshow
command provides information on the devices that are proxy to the edge fabrics connected to the
FC Router. The information shows the devices connected to the edge fabric and information on the
other edge fabrics that are importing this device as a proxy device.
To view the complete information about all devices that are shared through a backbone fabric,
access the information at the fabric node level.
Displaying the FCR Information
1. Select the MetaSAN view from the Scope panel, then select a backbone fabric.
2. Select the FCR Route tab in the Information panel.
The FCR information displays, as shown in Figure 182. The FCR information does not display if
the fabric does not have an FC Router.
Edge Fabric 2
Target 2
P rox y
Target 2
P rox y
Hos t 1
Hos t 1
Edge Fabric 1
B ack bo ne Fa bric
EX
EX
E
E
FC Router 1
FC Router 2
E
E