Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

334 Fabric Manager Administrator’s Guide

53-10000610-02

Web Server port numbers

3. Replace the port number in the Port field if you need to use a different port number than the

default.

4. Optional: If you selected Connect using HTTPS (HTTP over SSL) only, check or uncheck the

following options. By default, both options are enabled.

• Enable hostname verification

If enabled, hostname verification fails if the name on the security certificate on the switch

is invalid or does not match the name or IP address of the switch.

• Enable certificate validation

If enabled, certificate validation fails if the security certificate was issued by a company

you have chosen not to trust or if the certificate date is invalid. To enable trust, you must

install the certificate in the Fabric Manager trusted root CAs store.

5. Click Apply to save the changes.

You must restart the server for the changes to take effect.

Web Server port numbers

Using the Settings tab of the Server Management Console, you can change the Web Server port

number and the syslog listening port number. The configuration setting applies to the entire Fabric

Manager server and not to selected switches. The default Web Server port number is 80. The

default syslog listening port number is 514.

FIGURE 225 Server Management Console, Settings tab