Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

Fabric Manager Administrator’s Guide 339
53-10000610-02
Fabric merge check
27
Performing a fabric merge check
1. Log in to the switches that you are considering merging. See “Simultaneous login to multiple
switches” on page 63 for additional information.
2. Select Tasks > Fabric Management > Fabric Merge Check.
The Fabric Merge Check dialog box opens, as shown in Figure 227.
FIGURE 227 Fabric merge check
3. Select a fabric from each of the menus. The selected fabrics will be checked for merge
compatibility.
4. Click Merge Check.
The Fabric Merge Test Results window displays a list of any inconsistencies between the two
fabrics (see Figure 228).
TABLE 22 Fabric Merge Check Component Tests
All fabrics Secure fabrics only Non-secure fabric only
• Domain IDs
• TimeOutValues
• Buffer-to-Buffer Credits
• Disable Device Probe
• Route Priority per Frame
• VC Priority
• Fabric Manager Configuration and Data
• ACL
• Suppress Class F
• Long Distance Mode
• InterOp Mode
• Data Field Sizes
• VC Encoding
• PIDs
• Sequence Level Switching
• Security
• FCS policies
1
• SCC policy
1
• Version stamp
1
• Management Server
platform
1. Results for these tests are not displayed in the Merge Check Results window.
• Zoning