Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

340 Fabric Manager Administrator’s Guide
53-10000610-02
Fabric merge check
27
NOTE
If you run a fabric merge check between a secure fabric and a nonsecure fabric, the results of
the Security, FCS policies, version stamp, and Management Server platform tests display the
message, “Not applicable to subject fabrics.”
FIGURE 228 Merge check results
If the two zone databases on the fabrics will prevent the fabrics from merging, you are queried
about launching the Zone Merge Manager tool.
5. Optional: Launch the Zone Merge Manager tool.
This tool highlights all of the zoning conflicts between the two fabrics in red. With this
information, you can resolve the conflicts and apply the results to either of the fabrics.
The Fabric Merge Test Results window displays again. At the zoning test stage, it reports,
“Merge Check Successful,” with the results of the other tests.
If you decided not to use the Zone Merge Manager tool, then the zoning test reports that
“Operator cancelled zone merge - Merge Check Failed” for the zoning test, with the results of
all the other tests in the Fabric Merge Test Results window.