Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

Fabric Manager Administrator’s Guide 343
53-10000610-02
Event message severity level
27
Event message severity level
Fabric Manager writes event messages to a log file, which can then be used to capture diagnostic
information. You can set the log parameters to capture diagnostic information only at the severity
level you want. Configuring the severity level determines which messages you want Fabric Manager
to save to the log file. Any changes you make to the log level are immediate (they do not require an
application restart).
Configuring the severity level of logged event messages
1. Click Edit > Preferences.
The Preferences dialog box displays.
2. Expand User Specific and click Log Parameters.
The Log Parameters panel displays (see Figure 229).
FIGURE 229 Setting the log parameters
3. Select one of the following severity levels from the Log Level list.
The hierarchy, from most severe to least is: Fatal, Error, Warning, Info, and Debug. Fabric
Manager logs all events of the selected severity level and lower. Selecting Off disables the
logger.
4. Click OK.
Trace route
The trace route feature of Fabric Manager combines the functionality of the pathinfo and fcping
commands.