Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

356 Fabric Manager Administrator’s Guide
53-10000610-02
Topology
A
For additional information about the supportSave and supportShow commands, see the Fabric OS
Command Reference.
NOTE
You can also generate fmSupportShow (in Windows) by clicking
Start Menu > Programs > Fabric Manager > Utilities > Capture FM Support Information.
Capturing the supportShow and supportSave command output
1. Click Tasks > Technical Support Information > Capture SupportSave/SupportShow.
The Capture Technical Support Information wizard launches, as shown in Figure 233.
2. Follow the instructions in the wizard to select the switches and capture the supportSave or
supportShow information.
Note that it might take up to 30 minutes to capture supportSave information for some
switches. When you select the switches, if you select a single switch from each monitored
fabric, then the operation executes in parallel on each switch. If you select more than one
switch from the same fabric, the operation executes serially on those switches.
Alerts inform you when the capture is complete.
FIGURE 233 Capture Technical Support Information wizard
Topology
This section describes a few problem scenarios related to topology.