Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

360 Fabric Manager Administrator’s Guide
53-10000610-02
Additional problem areas
A
3. Click Custom Level.
4. Under the Scripting category, enable the following:
• Active scripting
• Allow paste options through script
• Scripting of Java applets
5. Click OK to close the Security Settings window.
6. In the Internet Options window, select Trusted sites and then click Sites.
7. Type the URL of the server that hosts the Fabric Manager server.
8. Uncheck the Require server verification check box.
9. Click Add.
10. Click OK to close the Internet Options window.
Illegal Argument Error (Windows)
On Windows, if you try to start the Fabric Manager client remotely (using a Fabric Manager server
running on a different host), you might get the following: “Java Web Start - Illegal Argument Error”.
The workaround for this is to delete the temporary internet files as follows:
1. In the Internet Explorer browser, click Tools > Internet Options.
2. Click the General tab.
3. In the Temporary Internet Files section, click Delete Files.
4. Click OK to confirm the deletion.
Failed to load resource
When launching the Fabric Manager client, if you get the error “Failed to load resource,” cancel the
operation and retry.
Web Tools pages do not launch
When launching the AD Admin, Fabric Watch, or Port Configuration modules, if you get the error
“Exception encountered during initialization,” this might mean that you lost access to the physical
fabric (AD255).
You must have access to at least AD0 and the physical fabric on an Admin Domain-aware switch to
monitor and manage that switch.
Wizard hangs
Occasionally the FC Router Configuration wizard and the Device Connectivity Troubleshooting
wizard (device diagnostic wizard) hang due to rendering issues with Java Swing. If this happens,
close the wizard by clicking the X button in the upper right corner of the window, and then relaunch
the wizard.