Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

Fabric Manager Administrator’s Guide 19
53-10000610-02
Fabric Manager server installation
2
FIGURE 5 Specify port number
11. Enter the Web server port number. The default is 80.
If you type a new Web server port number, make note of it; you must use the same port
number when you launch the Fabric Manager client. Do not use port 2638; it is used internally
by the Fabric Manager server.
12. Enter the starting port number. The default is 24600.
If the default starting port number is not a free port number, the server cannot start up
correctly. If you enter a new port number, you must ensure that it and the next nine port
numbers represent free ports.
NOTE
If you are upgrading or migrating from a previous version of Fabric Manager, you might receive
a message indicating that the ports are unavailable. This can occur when the ports have yet to
be released by the previous uninstall. You should wait a few minutes and try again.
13. Enter the syslog listening port number. The default is 514.
This is the port number on which Fabric Manager will listen for syslog messages.
14. Click Next.
The Please select authentication method dialog box displays.