Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

22 Fabric Manager Administrator’s Guide
53-10000610-02
Fabric Manager server installation
2
For switch-based authentication:
Enter the IP addresses of the switches, separating each IP address with a semicolon.
When using switch-based authentication, you should enter multiple switch IP addresses. If
you enter only a single switch IP address, you cannot access Fabric Manager if that switch
is down.
17. Click Next.
The Please select the size of the SAN dialog box displays. The selected SAN size setting can
affect Fabric Manager performance.
FIGURE 9 Select SAN sizes
18. Select the size of the SAN that Fabric Manager will be managing (Table 4 on page 14 lists the
polling rates for each SAN size).
19. Click Next.
The Important Information dialog box displays.
20. Ensure that the Services window is closed (as described in the Important Information dialog
box); then click Next.
When the Fabric Manager installation finishes, the Install Complete dialog box displays.