Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

Fabric OS Command Reference 129
53-1001764-01
configDownload
22
EXAMPLES To download the switch configuration file interactively to the current logical switch from a local directory
(no chassis permissions):
switch:admin> configdownload
Protocol (scp, ftp, sftp, local) [ftp]:
Server Name or IP Address [host]: 192.168.163.233
User Name [user]: admin
Path/Filename [<home dir>/config.txt]:
Section (all|chassis|FID# [all]):
*** CAUTION ***
This command is used to download a backed-up configuration
for a specific switch. If using a file from a different
switch, this file's configuration settings will override
any current switch settings. Downloading a configuration
file, which was uploaded from a different type of switch,
may cause the switch to fail. A switch reboot might be
required for some parameter changes to take effect.
configDownload operation may take several minutes
to complete for large files.
Do you want to continue [y/n]: y
Password: *******
Activating configDownload: Switch is disabled
configDownload complete: All config parameters are downloaded
To download the switch configuration data to the current logical switch from an external FTP server (no
chassis permissions):
switch:admin> configdownload -ftp 192.168.38.245, \
jdoe,config.txt,password
To download all system configuration data for the chassis and all logical switches (requires chassis
permissions):
switch:admin> configdownload -all -ftp 192.168.38.245, \
jdoe,config.txt,password
To download the switch configurations to a logical switch with FID 8 from an attached USB device
(requires chassis permissions):
switch:admin> configdownload -fid 8 -USB config.txt
To download the switch configurations belonging to a logical switch with FID 4 to a logical switch with FID
8 from an attached USB device (requires chassis permissions):
switch:admin> configdownload -fid 8 -sfid 4 \
-USB config_fid8.txt
To download the Virtual Fabric configuration file using secure FTP:
switch:admin> configdownload -vf -p sftp \
10.32.248.119,jdoe,/temp/switch-conf_66.txt,mypassword
SEE ALSO configDefault, configList, configShow, configUpload, configure, configRemove