Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)
Fabric OS Command Reference xxv
53-1002147-01
• portShow fciptunnel/fcipcircuit enhancements:
- New -s | --summary option displays a summary view of the tunnel configuration parameters for
a specific VE_Port.
- New -d | --detail option displays a full view configuration details for all configured tunnels when
used with the all port specifier.
• portCmd enhancements:
- --ping and --traceroute support failover crossports ( -x or--crossport).
- If no traffic priority is specified with the portCmd --tperf command, it only generates medium
traffic.
Inflight Encryption and Compression
• authUtil - Updated for configuration of ICLs for encryption.
• fabStatsShow - Updated feature display.
• islShow - Updated feature display.
• portCfgShow - Updated feature display.
• portShow - Updated feature display.
• secAuthSecret - Updated for configuration of ICLs for encryption.
Infrastructure
• auditCfg - New classes for Fabric Watch (FW) and Logical Switch operations (LS).
• chassisShow - Enhanced to display real-time power consumption for 10G/16G platforms.
• configDownload - New protocol -p sftp option to support secure FTP (SFTP).
• configUpload - New protocol -p sftp option to support secure FTP (SFTP).
• configureChassis - New option to “Add Suffix to the uploaded file name".
• fimrwareDownload enhancements:
- Ability to download firmware without a password.
- New -r option, downloads firmware to the secondary partition only.
- New protocol -p sftp option to support secure FTP (SFTP),
• firmwareShow - New --history option displays firmware download log.
• portCfgfillWord - New passive option and display support in portCfgShow (Not needed on Condor
3 -based platforms.
• portFlagShow - New port state No_SigDet (QSFP installed without cable).
• portPerfShow - New port state No_SigDet. A - t value 0 of means run the command only once
rather than every x seconds.
• portShow - New port state No_SigDet.
• switchshow - New -qsfp operand to display QSP. New port state No_SigDet.
• slotShow - Updated for new 16G blades. Removed references to SAS (no longer supported).
• supportFtp - New protocol -l sftp option to support secure FTP (SFTP).
• supportSave
- New protocol -l sftp option to support secure FTP (SFTP)
- Removed collection of co-CPU data to optimize performance