Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

Fabric OS Command Reference 815
53-1001764-01
portShow
22
Keepalive Timeout 90
Max Retransmissions 9
VC QoS Mapping off
DSCP Marking (Control): 10, DSCP Marking (Data): 62
VLAN Tagging Id 1062, L2CoS (Control): 1, L2CoS (data): 0
TCP Byte Streaming on
Status : Active
Connected Count: 1
Uptime 2 hours, 14 minutes, 47 seconds
IKE Policy 1
IPSec Policy 1
Pre-Shared Key testingFIPSandIPSec
VC QoS Map:
VC DSCP L2CoS VC DSCP L2CoS VC DSCP L2CoS VC DSCP L2CoS
0 46 7 1 07 0 2 11 3 3 15 3
4 19 3 5 23 3 6 27 0 7 31 0
8 35 0 9 39 0 10 43 4 11 47 4
12 51 4 13 55 4 14 59 4 15 63 0
To display FICON EPCB for a GbE port 0 tunnel ID 1 with post display clearing of relevant statistics:
switch:admin> portshow ficon ge0 1 -epcb -clear
To display a list of discovered devices and selected path and status information on each. Get the adrs
from this display for the next command:
switch:admin> portshow ficon ge0 all -fdcb
To display details on the FDCB specified in the adrs argument, which was derived from the previous
example:
switch:admin> portshow ficon ge0 all -fdcb 10008000
To display the same information as the previous example but with post display clearing of relevant
statistics:
switch:admin> portshow ficon ge0 all -fdcb 10008000 -clear
SEE ALSO authUtil, portCfg, portLoginShow, portCfgLongDistance, switchShow