Fabric OS Documentation Updates Supporting Fabric OS v6.4.x

Fabric OS Documentation Updates 51
53-1002063-12
Documentation updates for Fabric OS v6.4.0 and later
7
Chapter 6. Fabric, Security, SFP, and Performance Monitoring
Add a new section, “Monitoring the filter performance class” on page 53, after the “Example of
thConfig command” section, with the following information:
You can monitor the Filter Performance Monitor class and specify a filter monitor to be tracked by
Fabric Watch.
To specify and track a filter monitor, enter the thConfig command using the following parameters.
switch:admin> thconfig --set filter -area PERFPT -high -val 10
The PERFPT area provides threshold values to the user-defined frame type. When a new
user-defined frame type is created using the fmMonitor command, the threshold value is
automatically based on the PERFPT configuration at the time the frame type is created. In the
above example, the high threshold value is 10. Therefore, all frame monitors configured hereafter
will have a high threshold value of 10.
Chapter 7. Port Monitoring
In Table 16, “E_Port class default settings” on page 62, remove the rows for “Packet loss (VE_Port
only)” and “Utilization”.