HP StorageWorks Fabric OS 6.x administrator guide (5697-7344, March 2008)

Fabric OS 6.x administrator guide 133
6. Optional: Use the configure command to set switch to use non-signed firmware.
By keeping the switch set to use signed firmware, all firmware downloaded to the switch will have to be
signed with a key.
7. Disable selftests by typing the following command:
fipscfg --disable selftests
8. Disable IPFilter policies that were created to enable FIPS.
9. Optional: Configure RADIUS server authentication protocol.
10. Reboot the switch.
To zeroize for FIPS:
1. Log in to the switch using an account assigned the admin or securityAdmin role.
2. Type the command fipscfg
--zeroize.
3. Reboot the switch.
To display FIPS configuration:
1. Log in to the switch using an account assigned the admin or securityAdmin role.
2. Type the command fipscfg
--showall.