HP StorageWorks Fabric OS 6.x administrator guide (5697-7344, March 2008)

Fabric OS 6.x administrator guide 141
To download a configuration file from one switch to another same model switch:
1. Configure one switch first.
2. Use the configUpload command to save the configuration information. See ”Backing up a
configuration” on page 135.
3. Run configDefault on each of the target switches, and then use the configDownload command
to download the configuration file to each of the target switches. See ”Restoring a configuration” on
page 137.
Configuration form
Use Table 44 as a hard copy reference for your configuration information.
In the hardware reference manuals for the 4/256 SAN Director and DC SAN Backbone Director (short
name, DC Director) there is a guide for FC port setting tables. The tables can be used to record
configuration information for the various blades.
Table 44 Configuration and connection information
Configuration settings
IP address
Gateway address
Chassis configuration option
Management connections
Serial cable tag
Ethernet cable tag
Configuration information
Domain ID
Switch name
Ethernet IP address
Ethernet subnet mask
Total number of local devices (nsShow)
Total number of devices in fabric (nsAllShow)
Total number of switches in the fabric (fabricShow)