HP StorageWorks Fabric OS 6.x administrator guide (5697-7344, March 2008)

Fabric OS 6.x administrator guide 163
The auto-converted LSAN zone names might collide with LSAN zone names in AD0 (for example, in the
above example, if AD0 contains lsan_for_linux_farm_AD005, this would cause a name collision). Fabric
OS does not detect or report such name clash.
LSAN zone names greater than 57 characters are not converted or sent to the FCR phantom domain.
Configuration upload and download in an AD context
The behavior of configUpload and configDownload varies depending on the AD context and
whether the switch is a member of the current Admin Domain. In the AD context, these commands include
only the zone configuration of the current Admin Domain. If the switch is a member of the Admin Domain,
all switch configuration parameters are saved and the zone database for that Admin Domain is also saved.
Table 48 lists the sections in the configuration file and the Admin Domain contexts in which you can
upload and download these sections.
The configDefault command does not clear zone or Admin Domain database information. This
command is allowed only if the switch is a member of the current Admin Domain.
See ”Maintaining configurations” on page 135 for additional information.
Table 48 Configuration upload and download scenarios in an AD context
Configuration file sections
AD contexts iSCSI ACL Zon
e
AD
headers
Switch configuration and
other parameters
AD255
With ADs Yes Yes Yes
1
1. Zone databases for AD0 through AD254.
Yes Yes
Without ADs Yes Yes Yes<
supe
rscri
pt>1
Yes Yes
AD0
With ADs and switch membership Yes No Yes
2
2. Only zone database for AD0.
No Yes
With ADs and without switch
membership
Yes No Yes<
supe
rscri
pt>2
No No
Without ADs Yes Yes Yes<
supe
rscri
pt>2
No Yes
AD1 – AD254
With switch membership No No Yes
3
3. Only zone database for current AD.
No Yes
Without switch membership No No Yes<
supe
rscri
pt>3
No No