HP StorageWorks Fabric OS 6.x administrator guide (5697-7344, March 2008)

198 Configuring Directors
Basic blade management
The following sections provide procedures for powering a port blade off and on and for disabling and
enabling a port blade.
Powering port blades off and on
All blades are powered on by default when the switch chassis is powered on. Blades cannot be powered
off when POST or AP initialization is in progress.
NOTE: In the DC Director, the core blades in slots 5 and 8 cannot be powered off with the CLI interface.
Manual intervention is required.
23 13 5 / 13 5 151 / 151 167 / 167 18 3 / 18 3 19 9 / 19 9 215 / 215 2 31 / 2 31 247 / 247
2 2 13 4 / 13 4 15 0 / 15 0 16 6 / 16 6 18 2 / 18 2 19 8 / 19 8 214 / 214 2 3 0 / 2 3 0 24 6 / 2 46
21 13 3 / 13 3 149 / 14 9 16 5 / 16 5 181 / 181 197 / 197 213 / 213 2 29 / 2 29 24 5 / 24 5
20 132/132 148/148 164/164 180/180 196/196 212/212 228/228 244/244
19 131 / 131 147 / 147 16 3 / 163 179 / 179 195 / 19 5 211/211 227/227 243/243
18 130/130 146/146 162/162 178/178 194/194 210/210 226/226 242/242
17 129/129 145/145 161/161 177/177 193/193 209/209 225/225 241/241
16 128/128 144/144 160/160 176/176 192/192 208/208 224/224 240/240
15 15/15 31/31 47/47 63/63 79/79 95/95 111/111 127 / 127
14 14/14 30/30 46/46 62/62 78/78 94/94 110/110 126 /126
13 13/13 29/29 45/45 61/61 77/77 93/93 109/109 125/125
12 12/12 28/28 44/44 60/60 76/76 92/92 108/108 124/124
11 11/11 27/27 43/43 59/59 75/75 91/91 107/107 123/123
10 10/10 26/26 42/42 58/58 74/74 90/90 106/106 122/122
9 9/9 25/25 41/41 57/57 73/73 89/89 105/105 121/121
8 8/8 24/24 40/40 56/56 72/72 88/88 104/104 120/120
7 7/7 23/23 39/39 55/55 71/71 87/87 103/103 119/119
6 6/6 22/22 38/38 54/54 70/70 86/86 102/102 118/118
5 5/5 21/21 37/37 53/53 69/69 85/85 101/101 117/117
4 4/4 20/20 36/36 52/52 68/68 84/84 100/100 116/116
3 3/3 19/19 35/35 51/51 67/67 83/83 99/99 115/115
2 2/2 18/18 34/34 50/50 66/66 82/82 98/98 114/114
1 1/1 17/17 33/33 49/49 65/65 81/81 97/97 113/113
0 0/0 16/16 32/32 48/48 64/64 80/80 96/96 112/112
Table 52 Default index/area_ID core PID assignment with no port swap (continued)
Port on
blade
Slot
1Idx/area
Slot
2Idx/area
Slot
3Idx/area
Slot
4Idx/area
Slot
7Idx/area
Slot
8Idx/area
Slot
9Idx/area
Slot
10Idx/area