HP StorageWorks Fabric OS 6.x administrator guide (5697-7344, March 2008)

256 Using the FC-FC routing service
Figure 13 SAN Pilot and EFCM Zone screens
NOTE: The screens provided in this section are for illustrative purposes only. Depending on the M-EOS
firmware release you are using, the M-EOS web-based management tool may display a user interface
different from those shown.
4. Type the desired name in the Zone Name field, using the LSAN_xxxx naming schema.
In EFCM, move to the Zone Name field, and enter the desired name using the LSAN_xxxx naming
schema.
5. In SAN Pilot, click the Add button to add the specified zone.
As shown in the following illustration, when you add the new zone name, the name is displayed in the
Pending Zone Set list.