HP StorageWorks Fabric OS 6.x administrator guide (5697-7344, March 2008)

Fabric OS 6.x administrator guide 291
Viewing port information
Use the following commands to view information about ports.
To view the status of a port:
1. Connect to the switch and log in as admin.
2. Enter the portShow command, specifying the number that corresponds to the port you are
troubleshooting. In this example, the status of port two is shown:
switch:admin> switch:user> portshow 0
portName:
portHealth: OFFLINE
Authentication: None
portDisableReason: None
portCFlags: 0x1
portFlags: 0x4001 PRESENT U_PORT LED
portType: 4.1
portState: 2 Offline
portPhys: 2 No_Module
portScn: 0
port generation number: 0
portId: 010000
portIfId: 43020020
portWwn: 20:00:00:60:69:00:02:53
portWwn of device(s) connected:
Distance: normal
portSpeed: N2Gbps
LE domain: 0
Interrupts: 0 Link_failure: 0 Frjt: 0
Unknown: 0 Loss_of_sync: 0 Fbsy: 0
Lli: 0 Loss_of_sig: 0
Proc_rqrd: 0 Protocol_err: 0
Timed_out: 0 Invalid_word: 0
Rx_flushed: 0 Invalid_crc: 0
Tx_unavail: 0 Delim_err: 0
Free_buffer: 0 Address_err: 0
Port part of other ADs: Yes
See the Fabric OS Command Reference for additional portShow command information, such as the
syntax for slot or port numbering, displaying IP interfaces on a GbE port, or displaying FCIP tunnel
connection or configuration information.