HP StorageWorks Fabric OS 6.x administrator guide (5697-7344, March 2008)

Fabric OS 6.x administrator guide 401
The values represent the following:
To create a broadcast zone, use the reserved name “broadcast”.
3. Enter the cfgSave command to save the change to the defined configuration.
switch:admin> zonecreate "greenzone", "2,32; 2,33; 2,34; 4,4"
switch:admin> zonecreate "redzone", "21:00:00:20:37:0c:66:23; 4,3"
switch:admin> zonecreate "broadcast", "1,2; 2,33; 2,34"
switch:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on the Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n):
[no] y
To add devices (members) to a zone:
1. Connect to the switch and log in as admin.
2. Enter the zoneAdd command, using the following syntax:
zoneadd "zonename", "member[; member...]"
The values represent the following:
3. Enter the cfgSave command to save the change to the defined configuration.
switch:admin> zoneadd "greenzone", "1,2"
switch:admin> zoneadd "redzone", "21:00:00:20:37:0c:72:51"
switch:admin> zoneadd "broadcast", "1,3"
switch:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on the Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n):
[no] y
zonename The name of the zone to be created.
member A member or list of members to be added to the zone. A zone member
can be specified by one or more of the following methods:
• A domain,port pair.
• Device node or device port WWN
• Zone alias name
zonename The name of the zone.
member A member or list of members to be added to the zone. A zone member
can be specified by one or more of the following methods:
• A domain,port pair.
• Device node or device port WWN
• Zone alias name