130 Printing Guide [EFI Designer Edition RIP] - Create and print a contact sheet [Mac OS X]

HP LF Printing Knowledge Center

Create and print a contact sheet

Printer: HP Designjet 30/90/130 series

Software: EFI Designer Edition for HP

Operating System: Mac OS X

PAGE 1
HP LF Printing Knowledge Center Create and print a contact sheet Printer: HP Designjet 30/90/130 series Software: EFI Designer Edition for HP Operating System: Mac OS X
PAGE 2
1. First recommendations: • See the Media type functionality & features and choose the most appropriate media. • It is essential to have the media type correctly calibrated with the printer and print mode, consult the Calibrate my printer document. 2. Open the EFI Designer Edition RIP. 3. EFI Designer Edition RIP settings, Preferences: • • Color: o Check that the Color Management is active.
PAGE 3
4. Add button, browse your file and click Open or drag and drop the file to the spool panel. 5. Select all the files and click Nesting button. 6. Check the print layout before printing, select the nesting file and press the Preview button, if it is ready click Print. If you need to retouch any setting, you can do it in the Individual Job Settings (View menu > Job Info).
PAGE 4
For more information on HP Designjet products www.hp.com/go/designjet © 2005 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.