HP LF Printing Knowledge Center Calibrate my printer: Printer: HP Designjet 30/90/130 series Software: HP Driver Operating System: Windows
The color calibration must be performed whenever: • A printhead is changed • A new combination of paper type and printmode is loaded which has not been previously calibrated. • The environmental conditions change (for example, temperature or humidity) • You notice a deterioration in the quality of your prints. 1. To start the calibration process, load your paper into the printer and click on the Color Calibration desktop icon. 2. Select the printer your are working with: • Click Next.... 3.
• Click calibrate color. 4. The printer will print and measure the linearization target. If you see a checkmark at the bottom of the page, the calibration was successful.
For more information on HP Designjet products www.hp.com/go/designjet © 2005 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
