130 Printing Guide [EFI Designer Edition RIP] - Printing in Black & White [Windows]

ManualsBrandsHP ManualsPrinterHP Designjet 130r Printer

HP LF Printing Knowledge Center

Printing in Black & White

Printer: HP Designjet 30/90/130 series

Software: EFI Designer Edition for HP

Operating System: Windows

Summary of content (4 pages)

PAGE 1
HP LF Printing Knowledge Center Printing in Black & White Printer: HP Designjet 30/90/130 series Software: EFI Designer Edition for HP Operating System: Windows
PAGE 2
1. First recommendations: • It is assumed that the image you have was in the past originally in black and white (RGB color mode). If the gray neutrality of your print is not good enough for you, please use an application such as Photoshop to apply color management, consult the document Printing in Black&White with dj30/90/130 printer and Photoshop. • See the Media type functionality & features and choose the most appropriate media.
PAGE 3
• • Layout: o Orientation: Select the orientation of your image on the paper. o Set the Alignment and the Scaling setting you need. Printer: o • Paper size: Select the paper size of the media loaded on the printer. Click OK. 4. Add button, browse your file and click Open or drag and drop the file to the spool panel. 5. Check the print layout before printing, select the file and press the Preview button, if it is ready click Print.
PAGE 4
For more information on HP Designjet products www.hp.com/go/designjet © 2005 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.