HP LF Printing Knowledge Center Printing in Black&White Application: Adobe Illustrator CS Printer: HP Designjet 30/90/130 series Software: HP Driver Operating System: Mac OS X
The simplest approach to creating a black and white image is taking a color image and converting it to grayscale in an imaging program such as Photoshop or Illustrator. In addition, although converting an image from color to grayscale is easy, the opposite operation is complex, in this case it is better to have it in color. 1. First recommendations: • See the Media type functionality & features and choose the most appropriate media.
4. Open the image, File menu > Open…: • If the document has an embedded color profile that does not match the current working space, select Use the embedded profile. Otherwise, select Assign working space. • Click OK. 5. If you place an image, you can embed the image in the document. If it has an embedded profile, it will be converted from the embedded color profile to the document color profile preserving the color appearance.
6. Make sure you have configured the Document Setup appropriately for your document, File menu > Document Setup…. 7. Driver Settings, File menu > Print…: • Printer: Select the printer (ex. hp designjet 130). • Page Setup…: • o Format for: Select the printer. o Paper Size: Select the paper size of the media loaded on the printer. o Orientation: Select the orientation of your image on the paper. o Click OK. Printer...
o • Print Space > Intent: Perceptual. Click Print.
For more information on HP Designjet products www.hp.com/go/designjet © 2005 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
