HP Designjet 4200 Scanner - User Guide

hp designjet 815mfp & scanner 4200 7
4. To set the output size you can:
• Specify the width and length. The original’s width can be
read off the ruler at the scanner’s insertion slot.
• Select Auto Width and/or Auto Length to let the scanner
detect the physical input width and/or length of the
inserted document.
• Press the dialog’s Output size button to display the list of
available sizes.
Both Auto Width and Auto Length can be applied for total
output size detection. Automatic size detection works through a
prescan of the original and copying thus requires more time
than with manual size settings.
5. Press OK to return to the Copy tab.
You can also use a scale factor to determine the output size. See
how do I scale copies? on page 11.
see also
tell me about the copy size on page 73
how do I set the input size? on page 4
how do I copy thick media?
Scanning thick media can require enlarging the insertion slot and
this can affect the scanner's automatic control of border lines
between the cameras—called Stitching.
First you must adjust the insertion slot to accommodate your thick
media. See how do I change the insertion slot height? on page 8.
to copy thick media…
1. Load the thick original you wish to scan.
Center loading is recommended with thick originals. The
scanner’s transport rollers grip more evenly with center
loading.
2. Make a test scan.
Bulky thick media need to be supported with both hands both
into and out of the scanner.
Stitching errors will be easiest to see on an image with one or
more clear diagonal lines.