130 Printing Guide [EFI Designer Edition RIP] - Proof a press with Pantone colors [Mac OS X]

ManualsBrandsHP ManualsPrinterHP Designjet 90gp Printer

HP LF Printing Knowledge Center

Proof a press with Pantone Colors

Printer: HP Designjet 30/90/130 series

Software: EFI Designer Edition for HP

Operating System: Mac OS X

Summary of content (4 pages)

PAGE 1
HP LF Printing Knowledge Center Proof a press with Pantone Colors Printer: HP Designjet 30/90/130 series Software: EFI Designer Edition for HP Operating System: Mac OS X
PAGE 2
1. First recommendations: • See the Media type functionality & features and choose the most appropriate media. • It is essential to have the media type correctly calibrated with the printer and print mode, consult the Calibrate my printer document. 2. Open the EFI Designer Edition RIP. 3. When using a calibrated printer (with the HP Professional Pantone Emulation feature) the Pantone colors will act as a spot color and will not be affected by the RIP color settings.
PAGE 3
5. Check the print layout before printing, select the file and press the Preview button. If you need to retouch any setting, you can do it in the Individual Job Settings (View menu > Job Info). 6. Check whether the RIP recognizes the spot colors in your job. Spot Colors button in the Individual Job Settings under Info tab. With this setting you can check whether your spot colors will be processed correctly without the need to print your job. • Click OK. 7. If it is ready, click Print.
PAGE 4
For more information on HP Designjet products www.hp.com/go/designjet © 2005 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.