Designjet D5800 Production Printer Introductory Information
What is it? Your printer is a color inkjet printer designed for fast, high-quality printing, with a resolution of up to 2400 × 1200 optimized dpi from a 1200 × 1200 dpi input (using the Max. resolution for photo papers option). • Maximum paper width of 1524 mm (60 in) * • A four-ink system that provides a wide color range on polypropylene, matte fine-art papers and glossy photo papers for photographic and graphic arts prints.
• Use only the electrical cord supplied by HP with the printer. Do not damage, cut or repair the power cord. A damaged power cord can cause fire or electric shock. Replace a damaged power cord with an HP-approved power cord. • Do not allow metal or liquids (except those used in HP Cleaning Kits) to touch the internal parts of the printer. Doing so can cause fire, electric shock or other serious hazards.
13. Status light: indicates the printer’s status. If the status light is solid green, the printer is ready. If it is flashing green, the printer is busy. If it is solid amber, there is a system error. If it is flashing amber, the printer needs attention. Front-panel error messages and codes If an error message appears on the front panel that is not included in this list, and you are in doubt about the correct response, turn off the printer and then turn it back on.
Power specifications Auto-ranging input voltage and current 100–127 V AC (±10%), 5 A 220–240 V AC (±10%), 3 A Frequency 50/60 Hz (±3 Hz) Power 420 W maximum 270 W printing < 48 W ready < 5 W asleep < 0.