4 HP Designjet H35000/H45000 Printer series Site Preparation Guide
Preparing for Your New Printer Preparing for Your New Printer Follow these guidelines to prepare your site for delivery of the printer. Electrical Power The required electric circuit must be installed by a qualified electrician before the printer can be installed (see Table 2, “Specifications,” on page 4). The printer is supplied with the required power cord, which must not be lengthened or attached to an extension cord.
Preparing for Your New Printer For further details, see the diagrams below and the dimensions shown in Table 2, “Specifications,” on page 4. Input Side 27.6" (70 cm) 170.6" (433 cm) 127.8" (325 cm) Power Inlet 108.0" (274 cm) Output Side Ink and Media Handling You will need an area near the printer to store media and ink, and to finish and package prints for shipment or distribution.
Preparing for Your New Printer Table 2: Specifications Dimensions (Assembled) Height: Depth with tables folded for storage: Depth with tables raised and fully extended: Depth with tables raised and extended, and wire supports extended: Width: 57.0 inches (145 cm) 27.63 inches (70 cm) 127.8 inches (325 cm) 170.6 inches (433 cm) 108.
Safety Information Safety Information • UV light — the ultraviolet (UV) curing lamps emit high power UV light. The printer must be operated with all safety shielding installed to protect the operator from eye and skin damage. When operated according to manufacturer’s instructions, safety glasses or other protective clothing are not necessary. • Mechanical hazards — Keep fingers away from carriage and media path. Use a fork lift truck to lift the printer.
Safety Information • Ozon – das Hochleistungs-UV-Licht, das von den Aushärtungslampen abgegeben wird, reagiert mit Sauerstoff und produziert Ozon. Diese Entwicklung ist am größten, während die Lampe hochgefahren wird. Der Drucker sollte in einem gut gelüftetem Umfeld betrieben werden, um geringfügige Auswirkungen, wie Kopfschmerzen, Müdigkeit und Austrocknen der oberen Atemwege zu vermeiden. Die normale Luftbewegung vermischt das Ozon mit Frischluft, wodurch es wieder zu Sauerstoff umgewandelt wird.
Safety Information une ventilation générale et locale adéquate. Eviter de respirer les vapeurs. Des protections respiratoires peuvent être nécessaires dans des circonstances exceptionnelles lorsque qu'une contamination excessive de l'air existe. Aucun des composant standard n'a été établi comme une menace our OSHA, NIOSH ou ACGIH. • Electricité — Lorsque la touche ON/OFF est sur la position OFF, l'électricité est quand même fournie aux composants de l'imprimante.
© Copyright 2007, 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
