HP Designjet H35000 and H45000 Printer Series - Printhead RMA Guidelines for Solvent and UV-Cure Printers

Printhead RMA Guidelines

For HP Scitex FB910 (ColorSpan 9840uv),

HP Designjet H35000/H45000 Printer series

(ColorSpan 5400uv Series), and ColorSpan

Legacy Solvent & UV Printers

PAGE 1
Printhead RMA Guidelines For HP Scitex FB910 (ColorSpan 9840uv), HP Designjet H35000/H45000 Printer series (ColorSpan 5400uv Series), and ColorSpan Legacy Solvent & UV Printers 1
PAGE 2
READ THIS DOCUMENT BEFORE REPLACING THE PRINTHEAD This document describes the necessary procedures for shipping a printhead from any of the ColorSpan Legacy Solvent or UV-Cure printers or HP Scitex FB910 (ColorSpan 9840uv) and HP Designjet H35000/H45000 Printer series (ColorSpan 5400uv Series), back to Hewlett-Packard under RMA. This document assumes the following: 1. You have read and completed all jet recover steps described in Tech Note 2727, Evaluating Jetting Performance & Steps for Jet Recovery. 2.
PAGE 3
© Copyright 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.