HP Designjet L65500 printer series Site preparation checklist (second edition)
Legal notices © 2009 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP Products and services are set forth in the express warranty statement accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
1 Instructions Complete the following address information, contact information, and checklist. If a checklist item cannot be completed or is unnecessary, add a short explanation under “Comments.” Once you have completed the checklist, sign it and send it to your reseller or HP sales representative a minimum of two weeks before the delivery date. NOTE: Some checklist items are marked ‘(Required)’, which means that you cannot proceed with installation until you have checked the ‘Yes’ box.
2 Checklist Address information Company name Postal code Street address Telephone City Fax Country E-mail Contact persons Name Telephone Email Company engineer or technician System administrator Operators to be trained on printer use and maintenance General access & equipment unloading Yes No Comments Is there an easily accessible unloading area, with sufficient space to unload and maneuver the equipment? Has the route to the installation area been checked to meet all requirements (height
Room layout and flooring Yes No Comments Yes No Comments Yes No Comments Is there sufficient space around the equipment? Has all room construction and painting been completed? Does the floor load-bearing capacity meet the specifications in this guide? Does the floor surface meet the specifications in this guide? If special reinforcements are necessary, are they completed? Safety requirements Is there an emergency exit in the print production area, with easy access and free from any obstruction? H
Electrical configuration Yes No Comments Yes No Comments Yes No Comments Will the power supply be more than five meters from the printer? If so, does the electrician understand that he/she will need to extend the power cables? If local regulations specify that you must use electrical plugs to connect the printer to the power supply, does the electrician have the required plugs ready for installation? Networking and computer requirements Is the RIP computer and software ready for installation? Hav
