HP LF Printing Knowledge Center Printing a drawing with correct size and position Application: Adobe Photoshop CS3 Printer: HP Designjet T1100 series Software: HP-GL/2 Driver Operating System: Windows
1. First recommendations: • Refer to the Media type functionality & features and choose the most appropriate media. • Ensure that the Paper Type setting on the front panel corresponds to the paper you intend to use. It is essential that the paper is correctly color calibrated for the printer; refer to Calibrate my printer document. 2. Open Adobe Photoshop CS3. 3. Configure the Color Settings, Edit menu > Color Settings…: • Make sure the setting More Options is displayed.
• Select OK.
. Open the image, File menu > Open…: If the document has an embedded color profile that does not match the current working space, select Use the embedded profile. Otherwise, select Assign working space; in this case, if the displayed image does not look correct, try assigning it to other color spaces with Edit > Assign Profile (try sRGB, Adobe RGB, ColorMatch RGB and others) until you are satisfied. • Select OK.
. Adobe Photoshop Print… settings; File menu > Print…: • Printer: Select your printer device. • Set the Position and the Scaled Print Size you need. • Make sure the More Options are displayed. • Select the Color Management tab: o Print: Document. o Options > Color Handling: Printer Manages Colors.
. Driver Settings; Click Print One…: • Paper/Quality tab: o Paper Options > Document size: Select the paper size of the media loaded on the printer. Select the Custom… button if you want to create a custom page size. o Paper Options > Paper Source: Select the source of the paper, Roll or Sheet. o Paper Options > Paper Type: Select the paper type that is loaded on the printer. o Orientation: Select the orientation of your image on the paper.
• Features tab: o Resizing Options: Select the scale option you want, select Print document on and the paper size on which the document will be scaled, or, the % of actual size. Make sure that the document size is not bigger than the paper size you have on the printer. o Roll Options: Check Autorotate checkbox. o Check Show preview before printing.
• • Color tab: o Select Print in color. o Select Color Management > Printer managed colors > sRGB. Select OK. 7. Preview your banner before printing; check, also, the print settings and the layout of the image (HP Print Preview windows is displayed automatically). Select the Continue button to proceed with printing or Cancel to cancel the job.
For more information on HP Designjet products www.hp.com/go/designjet © 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
