HP LF Printing Knowledge Center Printing your banner Printer: HP Designjet Z3100 series Software: EFI Designer Edition for HP Operating System: Windows
1. First recommendations: • See the Media type functionality & features and choose the most appropriate media. • It is essential you have the media type correctly calibrated with the printer, consult the Calibrate my printer document. • In order to get a correct display, it’s also essential you have the monitor calibrated, consult the Profile my monitor document. 2. Open the EFI Designer Edition RIP. 3.
• • Select Layout tab: o Orientation: Select the orientation of your image on the paper. o Set the Alignment and the Scaling setting you need. Select Printer tab: o • Paper size: Select the paper size of the media loaded on the printer. Select OK. 4. Select the Add button, browse to your file and select Open or drag and drop the file to the spool panel. 5. Check the print layout before printing, select the file and select the Preview button, if it is ready select Print.
For more information on HP Designjet products www.hp.com/go/designjet © 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
