HP LF Printing Knowledge Center How to do an art reproduction Application: Adobe Illustrator CS2 Printer: HP Designjet Z6100 series Software: HP PS Driver Operating System: Windows
You should consider that each person has their own perception and their own subjective opinion about the result; this is because there are various factors that can influence our opinions, such as the type of art reproduction (portrait, landscape…), the source color space, the media used, the environmental conditions, the subjective perception about your own image, etc.... This means the printing suggestion may not completely match with your own personal opinion 1.
• Click OK.
. Open the image, File menu > Open…: • If the document has an embedded color profile that does not match the current working space, select Use the embedded profile. Otherwise, select Assign current working space. • Click OK. 5. If you place an image, you should embed the image in the document. If it has an embedded profile, it will be converted from the embedded color profile to the document color profile preserving the color appearance.
8. Choose driver settings, click Setup… button: • Click Printer button and select your printer (ex. HP Designjet Z6100 44in Photo). • Click Preferences button: o Paper/Quality tab: • Document size: Select the media size that is loaded on the printer. • Orientation: Select the orientation of the paper. • Print Quality: Select Standard options and drag the slider to Quality (Best).
o Color tab > Color Options: • Select Print in color. • Select Color management > Printer managed colors: o Default RGB Source Profile: Select sRGB (HP). o Default CMYK Source Profile: Select Europe ISO Coated FOGRA27 (for Europe), U.S. Web Coated (SWOP) v2 (for US) and Japan Standard v2 (for Japan). o Rendering Intent: Select Relative Colorimetric and Black Point Compensation option. • Click OK and Print until the Illustrator print dialog box.
9. Adobe Illustrator Print… settings: • • • General (left hand menu): o Media > Size: Defined by Driver. o Options: Select the scaling option you need. Color Management (left hand menu): o Print Method > Color Handling: Let PostScript® printer determine colors. o Print Method > Rendering Intent: Relative Colorimetric. Click Print.
For more information on HP Designjet products www.hp.com/go/designjet © 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.