HP LF Printing Knowledge Center How to print a banner/poster Application: Adobe Acrobat Printer: HP Designjet Z6100 series Software: HP PS Driver Operating System: Windows
1. First recommendations: • In order to get a correct display, it’s also essential you have the monitor calibrated, refer to the Profile my monitor document. • Refer to the Media type functionality & features and choose the most appropriate media. • Ensure that the Paper Type setting on the front panel corresponds to the paper that you intend to use. It is essential that the paper is correctly color calibrated for the printer; refer to the Calibrate my printer document.
5. Check the print layout and the overall output before printing; Select Adobe Acrobat settings; File menu > Print…: • Printer > Name: Select the printer (ex. HP Designjet Z6100ps 42in Photo).
• Advanced button: o Output > Color: Select Composite. o Output > Printer Profile: Select Printer/PostScript Color Management. o Check Apply Working Color Spaces check box. o Click OK.
6. Driver print settings, Properties button: • Paper/Quality tab: o Paper Options > Document size: Select Custom…: • Name: Choose a name to identify your custom paper size. • Paper Size: Select the paper size you need. • Click Save and OK. The custom page size you have just defined will not become available for selection until you have exited and re-entered the Printing Properties dialog box. o Click OK to exit Printer Properties.
• Click Properties button again: • Paper/Quality tab: o Paper Size: Select the paper size you define on Custom Paper Size. Make sure that the document size is not bigger than the paper size you have in the printer o Orientation: Select the orientation of your banner on the paper. o Check Show preview before printing check box. o Print Quality: Select Standard Options and drag the slider to Quality.
• • Color tab > Color Options: o Select Print in color. o Select Color management > Printer managed colors: • Default RGB Source Profile: Select sRGB (HP). • Default CMYK Source Profile: Select Europe ISO Coated FOGRA27 (for Europe), U.S. Web Coated (SWOP) v2 (for US) and Japan Standard v2 (for Japan). • Rendering Intent: Relative Colorimetric. • Check Black Point Compensation check box. Click OK twice. 7.
For more information on HP Designjet products www.hp.com/go/designjet © 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
