HP Deskjet D2600 Printer series
1 Get to know the HP Printer Printer parts................................................................................................................................3 Control panel features................................................................................................................4 2 Print Print documents..........................................................................................................................5 Print photos..........................................
Contents 2
1 Get to know the HP Printer • • Printer parts Control panel features 1 Control panel 2 Paper-width guide 3 Paper tray 4 Paper tray extender (also referred to as the tray extender) 5 Paper stop 6 Cartridges 7 Front access door 8 Rear USB port 9 Power connection: Use only with the power adapter supplied by HP.
Chapter 1 Control panel features Get to know the HP Printer 4 1 On: Turns the product on or off. When the product is off, a minimal amount of power is still used. To completely remove power, turn off the product, then unplug the power cord. 2 Resume: Instructs the HP Printer to continue after a problem is solved. 3 Cancel: Stops the current operation. 4 Ink status lights: Lights are on when the ink is low, and flash when the print cartridge needs to be serviced.
2 Print Choose a print job to continue. Print documents Print photos Print envelopes Print on specialty media Print a Web page Related topics • Load media • Recommended papers for printing Print documents To print from a software application 1. Make sure you have paper loaded in the input tray. 2. On the File menu in your software application, click Print. 3. Make sure the product is the selected printer. 4. If you need to change settings, click the button that opens the Properties dialog box.
Chapter 2 5. Select the appropriate options for your print job by using the features available in the Advanced, Printing Shortcuts, Features, and Color tabs. TIP: You can easily select the appropriate options for your print job by choosing one of the predefined print tasks on the Printing Shortcuts tab. Click a type of print task in the Printing Shortcuts list. The default settings for that type of print task are set and summarized on the Printing Shortcuts tab.
7. In the Resizing Options area, click the appropriate paper size from the Size list. If the paper size and paper type are not compatible, the product software displays an alert and allows you to select a different type or size. 8. In the Basic Options area, select a high print quality, such as Best, from the Print Quality drop-down list. NOTE: For maximum dpi resolution, go to the Advanced tab, and then select Enabled from the Maximum dpi drop-down list.
Chapter 2 9. Select the Borderless printing check box if it is not already checked. If the borderless paper size and paper type are not compatible, the product software displays an alert and allows you to select a different type or size. 10. Click OK, and then click Print or OK in the Print dialog box. NOTE: Do not leave unused photo paper in the input tray. The paper might start to curl, which could reduce the quality of your printout. Photo paper should be flat before printing.
6. Click the Features tab, and then select the following print settings: • Paper Type: Plain paper • Size: An appropriate envelope size 7. Select any other print settings that you want, and then click OK. Related topics • Load media • View the print resolution • Create custom printing shortcuts • Set the default print settings • Stop the current job Print on specialty media Print transparencies 1. Slide the paper guide all the way to the left. 2. Place the transparencies in the right side of the tray.
Chapter 2 4. Slide the paper guide firmly against the edge of the cards. 5. Open the Printer Properties dialog box. 6. Click the Features tab, and then specify the following print settings: • Paper Type: Click More, click Specialty Papers, and then select an appropriate card type. • Print Quality: Normal or Best • Size: An appropriate card size 7. Select any other print settings that you want, and then click OK. Print labels 1. Slide the paper guide all the way to the left. 2.
Print brochures 1. Slide the paper guide all the way to the left. 2. Place the paper in the right side of the tray. The side to be printed on should face down. 3. Push the paper into the printer until it stops. 4. Slide the paper guide firmly against the edge of the paper. Print greeting cards 1. Slide the paper guide all the way to the left. 2. Fan the edges of the greeting cards to separate them, and then align the edges. 3. Place the greeting cards in the right side of the tray.
Chapter 2 7. Click the Features tab, and then specify the following print settings: • Print Quality: Normal • Paper Type: Click More, and then select an appropriate card type. • Size: An appropriate card size 8. Select any other print settings that you want, and then click OK. Print booklets 1. Slide the paper guide all the way to the left. 2. Place plain paper in the right side of the tray. The side to be printed on should face down. 3. Push the paper into the printer until it stops. 4.
Print posters 1. Slide the paper guide all the way to the left. 2. Place plain paper in the right side of the tray. The side to be printed on should face down. 3. Push the paper into the printer until it stops. 4. Slide the paper guide firmly against the edge of the paper. Print 5. Open the Printer Properties dialog box. 6. Click the Features tab, and then specify the following print settings: • Paper Type: Plain Paper • Orientation: Portrait or Landscape • Size: An appropriate paper size 7.
Chapter 2 Print iron-on transfers 1. Slide the paper guide all the way to the left. 2. Place the iron-on transfer paper in the right side of the tray. The side to be printed on should face down. 3. Push the paper into the printer until it stops. 4. Slide the paper guide firmly against the edge of the paper. 5. Open the Printer Properties dialog box. 6.
• • Set the default print settings Stop the current job Print a Web page You can print a Web page from your Web browser on the HP Printer. If you use Internet Explorer 6.0 or higher for Web browsing, you can use HP Smart Web Printing to ensure simple, predictable web printing with control over what you want and how you want it printed. You can access HP Smart Web Printing from the toolbar in Internet Explorer. For more information about HP Smart Web Printing, see the help file provided with it.
Chapter 2 displays the optimized dots per inch (dpi) that the HP Printer printer will print. Printing in maximum dpi is supported on the following paper-types only: • • • • HP Premium Plus Photo Paper HP Premium Photo Paper HP Advanced Photo Paper Photo Hagaki Printing in maximum dpi takes longer than printing with other settings and requires a large amount of disk space. To print in Maximum dpi mode 1. Make sure you have paper loaded in the input tray. 2.
7. In the Paper Type drop-down list, select the type of paper that you have loaded. 8. Click the Resolution button to view the print resolution dpi. Create custom printing shortcuts Use printing shortcuts to print with print settings that you use often. The printer software has several specially designed printing shortcuts that are available in the Printing Shortcuts list. NOTE: When you select a printing shortcut the appropriate printing options are automatically displayed.
Chapter 2 5. In the Printing Shortcuts list, click the printing shortcut that you want to delete. 6. Click Delete. The printing shortcut is removed from the list. NOTE: Only the shortcuts that you have created can be deleted. The original HP shortcuts cannot be deleted.
3 Paper basics You can load many different types and sizes of paper in the HP Printer, including letter or A4 paper, photo paper, transparencies, and envelopes. This section contains the following topics: Load media Recommended papers for printing If you want the best print quality, HP recommends using HP papers that are specifically designed for the type of project you are printing. Depending on your country/region, some of these papers might not be available.
Chapter 3 paper. It features ColorLok Technology for less smearing, bolder blacks, and vivid colors. It is acid-free for longer lasting documents. HP Office Paper HP Office Paper is a high-quality multifunction paper. It is suitable for copies, drafts, memos, and other everyday documents. It features ColorLok Technology for less smearing, bolder blacks, and vivid colors. It is acid-free for longer lasting documents.
Load media ▲ Select a paper size to continue. Load small-size paper a. Slide paper-width guide to the left. ❑ Slide paper-width guide to the left. b. Load paper. ❑ Insert stack of photo paper into photo tray with short edge forward and print side down. ❑ Slide stack of paper forward until it stops. NOTE: If the photo paper you are using has perforated tabs, load photo paper so that tabs are closest to you. ❑ Slide paper-width guide to the right until it stops at edge of paper.
Chapter 3 Load envelopes a. Slide paper-width guide to the left. ❑ Slide paper-width guide to the left. ❑ Remove all paper from the main input tray. b. Load envelopes. ❑ Insert one or more envelopes into far-right side of the input tray, with envelope flaps on left and facing up. ❑ Slide stack of envelopes forward until it stops. ❑ Slide paper-width guide to the right against stack of envelopes until it stops.
Work with cartridges • • • • • • Check the estimated ink levels Order ink supplies Automatically clean print cartridges Manually clean print cartridges Replace the cartridges Cartridge warranty information Work with cartridges 4 Check the estimated ink levels You can easily check the ink supply level to determine how soon you might need to replace a cartridge. The ink supply level shows an estimate of the amount of ink remaining in the cartridges.
Chapter 4 Order ink supplies For a list of cartridge numbers, use the software that came with the HP Printer to find out the reorder number. Work with cartridges Find the cartridge number 1. In the HP Solution Center, click Settings, point to Print Settings, and then click Printer Toolbox. NOTE: You can also open the Printer Toolbox from the Print Properties dialog box. In the Print Properties dialog box, click the Features tab, and then click the Printer Services button. The Printer Toolbox appears. 2.
Automatically clean print cartridges If your printed pages are faded or if they contain ink streaks, the print cartridges might be low on ink or might need to be cleaned. For more information, see Check the estimated ink levels. Work with cartridges If the print cartridges are not low on ink, clean the print cartridges automatically. If your documents are still faded after cleaning, manually clean the print cartridge contacts. For more information, see Manually clean print cartridges.
Chapter 4 5. Dip a clean foam rubber swab or lint-free cloth into distilled water, and squeeze any excess water from it. 6. Hold the print cartridge by its sides. 7. Clean only the copper-colored contacts. Allow the print cartridges to dry for approximately ten minutes. Work with cartridges 1 Copper-colored contacts 2 Ink nozzles (do not clean) 8. Hold the print cartridge with the HP logo on top, and insert the print cartridge back into the slot.
Work with cartridges Wait for print carriage to move to center of the product. b. Press down to release cartridge, then remove it from slot. 3. Insert new cartridge. a. Remove cartridge from packaging. b. Remove plastic tape using pink pull tab.
Chapter 4 c. Line up colored shaped icons, then slide cartridge into slot until it clicks into place. Work with cartridges d. Close cartridge door. Related topics • Choose the right cartridges • Order ink supplies Cartridge warranty information The HP cartridge warranty is applicable when the product is used in its designated HP printing device. This warranty does not cover HP ink products that have been refilled, remanufactured, refurbished, misused, or tampered with.
5 Solve a problem This section contains the following topics: • • • • • HP support Setup troubleshooting Print quality troubleshooting Print troubleshooting Errors HP support • • • Support process HP support by phone Additional warranty options If you have a problem, follow these steps: 1. Check the documentation that came with the product. 2. Visit the HP online support Web site at www.hp.com/support. HP online support is available to all HP customers.
Chapter 5 Placing a call Call HP support while you are in front of the computer and the product.
Support phone numbers For the most current HP list of telephone support numbers and call costs information, see www.hp.com/support. www.hp.
Chapter 5 HP dealer or call the support phone number for your country/region to learn more about support options. Additional warranty options Extended service plans are available for the HP Printer at additional costs. Go to www.hp.com/support, select your country/region and language, then explore the services and warranty area for information about the extended service plans. Setup troubleshooting This section contains setup troubleshooting information for the product.
Solution 1: Make sure the power cord is connected • • • 1 Power connection 2 Power cord and adapter If you are using a power strip, make sure the power strip is on. Or, try plugging the product directly into a power outlet. Test the power outlet to make sure it is working. Plug in an appliance that you know works, and see if the appliance has power. If not, then there might be a problem with the power outlet. If you plugged the product into a switched outlet, make sure the outlet is switched on.
Chapter 5 After setting up the product, it does not print Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.
Solution 5: Load paper in the input tray Solution: Load paper in the input tray. For more information, see: Load media Cause: The product might have been out of paper. The Minimum System Checks screen appears Solution: Click Details to see what the specific problem is, and then correct the problem before attempting to install the software. Cause: Your system did not meet the minimum requirements to install the software. A red X appears on the USB connect prompt To retry the USB connection 1.
Chapter 5 4. Click Retry to retry the connection. 5. Continue with the installation and restart the computer when prompted. Cause: Normally, a green check appears indicating that the plug and play was successful. A red X indicates that the plug and play failed. I received a message that an Unknown Error has occurred Solution: Try to continue with the installation. If that does not work, stop and then restart the installation, and follow the directions on the screen.
4. Restart your computer. NOTE: It is important that you disconnect the product before restarting your computer. Do not connect the product to your computer until after you have reinstalled the software. 5. Insert the product CD-ROM into your computer’s CD-ROM drive and then start the Setup program. 6. Follow the onscreen instructions. Solve a problem When the software installation is complete, the HP Digital Imaging Monitor icon appears in the Windows system tray.
Chapter 5 Wrong, inaccurate, or bleeding colors If your printout has one of the following print quality problems, try the solutions in this section for help. • • Colors look different than what you expected. For example, the colors in your graphic or photo look one way on your computer screen but print out differently, or magenta was replaced with cyan in your printout. Colors run into each other, or look like they are smeared on the page.
Cause: The paper was loaded incorrectly, or it was wrinkled or too thick. If this did not solve the issue, try the next solution. Solution 3: Check the paper type Solution: HP recommends that you use HP papers or any other paper type that is appropriate for the product. Always make sure the paper you are printing on is flat. For best results when printing images, use HP Advanced Photo Paper. Store photo media in its original packaging inside a resealable plastic bag on a flat surface in a cool, dry place.
Chapter 5 NOTE: On some computer screens, colors might appear differently than they do when printed on paper. In this case, there is nothing wrong with the product, print settings, or ink cartridges. No further troubleshooting is required. Cause: The print settings were set incorrectly. If this did not solve the issue, try the next solution. Solution 6: Align the printer Solution: Align the printer. Aligning the printer can help ensure excellent print quality.
Ink is not filling the text or graphics completely Try the following solutions if the ink is not filling the text or image completely so that it appears that parts are missing or blank.
Chapter 5 If this did not solve the issue, try the next solution. Solution 4: Check the paper type Solution: HP recommends that you use HP papers or any other paper type that is appropriate for the product. Always make sure the paper you are printing on is flat. For best results when printing images, use HP Advanced Photo Paper. Store photo media in its original packaging inside a resealable plastic bag on a flat surface in a cool, dry place.
Always make sure the paper you are printing on is flat. For best results when printing images, use HP Advanced Photo Paper. Store photo media in its original packaging inside a resealable plastic bag on a flat surface in a cool, dry place. When you are ready to print, remove only the paper you plan to use immediately. When you have finished printing, return any unused photo paper to the plastic bag. This will prevent the photo paper from curling.
Chapter 5 Printouts have horizontal streaks or lines Try the following solutions if your printout has lines, streaks, or marks on it that run across the width of the page. • • • • • • • Solution 1: Make sure you are using genuine HP ink cartridges Solution 2: Check the ink levels Solution 3: Make sure the paper is loaded correctly Solution 4: Use a higher print quality setting Solution 5: Align the printer Solution 5: Automatically clean the print cartridges.
If this did not solve the issue, try the next solution. Solution 4: Use a higher print quality setting Solution: Check the print quality setting and make sure it is not set too low. NOTE: To find out what dpi the product will print based on the paper type and print quality settings you selected, click Resolution. Print the image with a high print quality setting, such as Best or Maximum dpi.
Chapter 5 4. Click the Device Services tab. 5. Click Align the Printer. The product prints a test page, aligns the print head, and calibrates the printer. Recycle or discard the page. Cause: The printer needed to be aligned. If this did not solve the issue, try the next solution. Solution 5: Automatically clean the print cartridges. Solution: Clean the print cartridges. For more information, see Automatically clean print cartridges Cause: The print cartridge nozzles needed to be cleaned.
NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Product service or repairs required as a result of using a non-HP supply will not be covered under warranty. If you believe you purchased genuine HP ink cartridges, go to: www.hp.com/go/anticounterfeit Cause: Non-HP ink cartridges were being used. If this did not solve the issue, try the next solution. Solution 2: Check the ink levels Solution: Check the estimated ink levels in the cartridges.
Chapter 5 plan to use immediately. When you have finished printing, return any unused photo paper to the plastic bag. This will prevent the photo paper from curling. For more information, see: • • Load media Recommended papers for printing Cause: The wrong kind of paper was loaded in the input tray. If this did not solve the issue, try the next solution. Solution 5: Automatically clean the print cartridges. Solution: Clean the print cartridges.
Solution 1: Check the print settings Solution: Check the print settings. • Check the paper type setting to make sure it matches the type of paper loaded in the input tray. • Check the print quality setting and make sure it is not set too low. Print the image with a high print quality setting, such as Best or Maximum dpi. Cause: The paper type or print quality settings were set incorrectly. If this did not solve the issue, try the next solution.
Chapter 5 3. In the Print Settings area, click Printer Toolbox. NOTE: You can also open the Printer Toolbox from the Print Properties dialog box. In the Print Properties dialog box, click the Features tab, and then click Printer Services. The Printer Toolbox appears. 4. Click the Device Services tab. 5. Click Align the Printer. The product prints a test page, aligns the print head, and calibrates the printer. Recycle or discard the page. Cause: The printer needed to be aligned.
Solution 2: Make sure only one type of paper is loaded Solution: Load only one type of paper at a time. Cause: More than one type of paper was loaded in the input tray. Ink streaks on the back of the paper Try the following solutions if there is smeared ink on the back of your printout. • • Solution 1: Print on a page of plain paper Solution 2: Wait while the ink dries Solution 1: Print on a page of plain paper To remove excess ink using plain paper 1.
Chapter 5 Solution 1: Use TrueType or OpenType fonts Solution: Use TrueType or OpenType fonts to ensure that the product is able to print smooth fonts. When selecting a font, look for the TrueType or OpenType icon. TrueType icon Cause: OpenType icon The font was a custom size. Some software applications offer custom fonts that have jagged edges when enlarged or printed. Also, if you want to print bitmapped text, it might have jagged edges when enlarged or printed.
If this did not solve the issue, try the next solution.
Chapter 5 Cause: The wrong type of envelope was loaded. If this did not solve the issue, try the next solution. Solution 3: Tuck the flaps to avoid paper jams Solution: Cause: To avoid paper jams, tuck the flaps inside the envelopes. The flaps might get caught in the rollers. The product prints meaningless characters Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first.
The margins are not printing as expected Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.
Chapter 5 If this did not solve the issue, try the next solution. Solution 4: Load the stack of envelopes correctly Solution: Remove all paper from the input tray. Load a stack of envelopes in the input tray, with the envelope flaps facing up and on the left. NOTE: To avoid paper jams, tuck the flaps inside the envelopes. Solve a problem For more information, see: Load media Cause: A stack of envelopes was loaded incorrectly.
If this did not solve the issue, try the next solution. Solution 2: Check for blank pages at the end of the document Solution: Open the document file in your software application and remove any extra pages or lines at the end of the document. Cause: The document you are printing contains an additional blank page. If this did not solve the issue, try the next solution. Solution 3: Load more paper in the input tray Solution: If the product has only a few sheets remaining, load more paper in the input tray.
Chapter 5 Cause: The protective plastic tape was only partially removed from the print cartridge. Errors If the product has an error, the lights on the product might flash, or an error message might appear on your computer screen.
(continued) On light Resume light Check Print Cartridge lights Description Solution Clear the paper jam, and then press Resume. Fast blinking Off Off The front access door or the print cartridge access door is open. Close the front access door or the print cartridge access door. On Off Fast blinking The print cartridges are missing or not seated correctly. Install or remove and reinsert print cartridges. The print cartridge might be defective.
Chapter 5 (continued) On light On Resume light Off Check Print Cartridge lights Description Solution Black print cartridge light Off The tri-color print cartridge has been removed. Replace the tri-color print cartridge, or print in ink-backup mode with the black print cartridge. For more information, see Printing in inkbackup mode. Tri-color print cartridge light Off The black print cartridge is getting low on ink. Replace the black print cartridge when print quality is no longer acceptable.
Cause: The product software could not open or save the file. File not found Solution: Close some applications and try the task again. Cause: There was not enough available memory on your computer to create a print preview file. File format not supported Solution: Open the file in another application, and save it in a format that the product software recognizes.
Chapter 5 Out of disk space Solution: Cause: task. Close some applications and try the task again. There was not enough available memory on your computer to perform the Paper messages The following is a list of paper-related error messages: • Ink is drying Ink is drying Solution: Leave the sheet in the output tray until the message disappears.
Non-HP cartridges installed Solution: Follow the prompts on the computer screen to continue or replace the indicated print cartridges with genuine HP cartridges. HP recommends that you use genuine HP print cartridges. Genuine HP print cartridges are designed and tested with HP printers to help you easily produce great results, time after time. NOTE: HP cannot guarantee the quality or reliability of non-HP supplies.
Chapter 5 Cause: The original HP ink in the indicated print cartridges was depleted. Low on ink Solution: Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not need to replace the print cartridges until print quality becomes unacceptable.
Incorrectly Installed Cartridge(s) Print Cartridge(s) Missing Print cartridges missing or not detected Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.
Chapter 5 5. Reinsert the print cartridge by sliding it forward into the slot on the right. Then push the print cartridge forward until it clicks into the socket. 6. Repeat steps 1 and 2 for the tri-color print cartridge on the left side. Cause: The indicated print cartridges were installed incorrectly. If this did not solve the issue, try the next solution. Solution 2: Clean the print cartridge contacts Solve a problem Solution: Clean the print cartridge contacts.
1 Copper-colored contacts 2 Ink nozzles (do not clean) 8. Hold the print cartridge with the HP logo on top, and insert the print cartridge back into the slot. Make sure you push the print cartridge in firmly until it snaps into place. 9. Repeat if necessary for the other print cartridge. 10. Gently close the print cartridge door and plug the power cord into the back of the product. Cause: The print cartridge contacts needed to be cleaned. If this did not solve the issue, try the next solution.
Chapter 5 Check to see if your print cartridge is still under warranty and end of warranty date has not been reached. • • If the end of warranty date has been reached, purchase a new print cartridge. If the end of warranty date has not been reached, contact HP support. Go to www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support. Related topics Replace the cartridges Cause: The print cartridge was damaged.
Print cartridges in wrong slot To make sure the print cartridges are installed correctly 1. Make sure the product is turned on. 2. Open the print cartridge door. The print carriage moves to the center of the product. 3. Check to make sure you are using the correct print cartridges for your product. For more information about compatible print cartridges, see Order ink supplies 4. Remove the black print cartridge from the slot on the right. Do not touch the ink nozzles or the copper-colored contacts.
Chapter 5 5. Reinsert the print cartridge by sliding it forward into the slot on the right. Then push the print cartridge forward until it clicks into the socket. 6. Repeat steps 1 and 2 for the tri-color print cartridge on the left side. NOTE: If the print cartridges are installed in the wrong slots and you cannot remove them from the product, contact HP support for service. Go to: www.hp.com/support.
1 Copper-colored contacts 2 Plastic tape with pink pull tab (must be removed before installing) 3 Ink nozzles under tape Solve a problem 4. Remove the black print cartridge from the slot on the right. Do not touch the ink nozzles or the copper-colored contacts. Check for possible damage to the coppercolored contacts or ink nozzles. Make sure the clear plastic tape has been removed. If it is still covering the ink nozzles, gently remove the clear plastic tape by using the pink pull tab.
Chapter 5 Make sure you have the following materials available: • Dry foam rubber swabs, lint-free cloth, or any soft material that will not come apart or leave fibers. TIP: Coffee filters are lint-free and work well for cleaning print cartridges. • Distilled, filtered, or bottled water (tap water might contain contaminants that can damage the print cartridges). CAUTION: Do not use platen cleaners or alcohol to clean the print cartridge contacts. These can damage the print cartridge or the product.
8. Hold the print cartridge with the HP logo on top, and insert the print cartridge back into the slot. Make sure you push the print cartridge in firmly until it snaps into place. 9. Repeat if necessary for the other print cartridge. 10. Gently close the print cartridge door and plug the power cord into the back of the product. Cause: The print cartridge contacts needed to be cleaned. Solution 3: Replace the print cartridges Solution: Replace the print cartridges that are experiencing the problem.
Chapter 5 Solve a problem 74 Solve a problem
Stop the current job To stop a print job from the HP Printer ▲ Press Cancel on the control panel. If the print job does not stop, press Cancel again. It can take a few moments for printing to be cancelled.
Chapter 6 Stop the current job 76 Stop the current job
7 Technical information The technical specifications and international regulatory information for the HP Printer are provided in this section. For additional specifications, see the printed documentation that came with the HP Printer. This section contains the following topics: • • • • Notice Specifications Environmental product stewardship program Regulatory notices Notice Hewlett-Packard Company notices The information contained in this document is subject to change without notice. All rights reserved.
Chapter 7 Legal Paper: 70 to 90 g/m² (20 to 24 lb) Envelopes: 70 to 90 g/m² (20 to 24 lb) Cards: Up to 200 g/m² (110-lb index maximum) Photo Paper: Up to 280 g/m² (75-lb index maximum) Print resolution To find out about the printer resolution, see the printer software. For more information, see View the print resolution. Cartridge yield Visit www.hp.com/go/learnaboutsupplies for more information on estimated cartridge yields.
www.hp.com/hpinfo/globalcitizenship/environment/ Your product's Eco features • Smart Web printing: The HP Smart Web Printing interface includes a Clip Book and Edit Clips window where you can store, organize, or print clips you have gathered from the Web. For more information, see Print a Web page. • • Energy Savings information: To determine the ENERGY STAR® qualification status for this product, see Power consumption.
Chapter 7 English Français Deutsch Italiano Español Česky Likvidace vysloužilého zařízení uživateli v domácnosti v zemích EU Tato značka na produktu nebo na jeho obalu označuje, že tento produkt nesmí být likvidován prostým vyhozením do běžného domovního odpadu. Odpovídáte za to, že vysloužilé zařízení bude předáno k likvidaci do stanovených sběrných míst určených k recyklaci vysloužilých elektrických a elektronických zařízení.
1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at: www.hp.com/go/reach. Toxic and hazardous substance table Regulatory notices The HP Printer meets product requirements from regulatory agencies in your country/region.
Chapter 7 FCC statement FCC statement The United States Federal Communications Commission (in 47 CFR 15.105) has specified that the following notice be brought to the attention of users of this product. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Technical information Notice to users in Japan about the power cord Regulatory notices 83
Chapter 7 HP Deskjet D2600 Printer series declaration of conformity DECLARATION OF CONFORMITY according to ISO/IEC 17050-1 and EN 17050-1 Supplier’s Name: Hewlett-Packard Company Supplier’s Address: 60, Alexandra Terrace, # 07-01 The Comtech, Singapore 118502 DoC#: SNPRB-0921-01-A declares, that the product Product Name: HP Deskjet D2600 Series Regulatory Model Number:1) SNPRB-0921-01 Product Options: All conforms to the following Product Specifications and Regulations: SAFETY: IEC 60950-1:200
Index M after the support period 31 margins incorrect 55 C color dull 46 connection problems HP All-in-One will not turn on 32 customer support warranty 32 E envelopes 53 environment Environmental product stewardship program 78 environmental specifications 77 error messages reading or writing file 60 F fax poor quality printouts 41 fax problems poor print quality 41 file invalid name 61 supported formats 61 unsupported formats 61 firmware revision mismatch 60 I improper shutdown 62 ink drying time 62
Index 86