HP Device Manager 4.5 - Installation Guide
40
• Report Session Timeout—After a report connection is established with the Server, it will be
maintained for a period of time equal to this value in seconds to reduce the cost of connection
establishment and cleaning up.
• Batch—The number of HPDM Agents that will be polled by HPDM Gateway in a batch.
• Poll interval—The interval in seconds between polling HPDM Agents.
• Local NIC—Select a network card for HPDM Gateway to send/receive tasks and reports.
• Gateway Scale—The number of HPDM Agents that will be managed by HPDM Gateway.
• Network timeout—Timeout in seconds for network input/output.
• Log Level—Sets the log level for the HPDM Gateway log file.
• Forcibly start gateway—Set to forcibly start HPDM Gateway even if another HPDM Gateway is
detected on the same subnet.
• Traffic Log Interval—The interval in minutes for logging traffic.
• Start PXE service when Gateway is started—If you want to capture/deploy images with PXE
mode, set this option to “Yes”.
HPDM Gateway tray icon colors
• Green—HPDM Gateway is running.
• Yellow—HPDM Gateway is stopping or starting.
• Red—HPDM Gateway is stopped.
• Red & Yellow—HPDM Gateway has found another HPDM Gateway running on the same subnet.
HPDM Gateway tray icon menu
• Start Device Management Gateway—Starts HPDM Gateway.
• Stop Device Management Gateway—Stops HPDM Gateway.
• Configure Device Management Gateway—Opens the HPDM Gateway Configuration window.
• Forcibly Start Device Management Gateway—Forcibly starts HPDM Gateway.
• Restart Device Management Gateway—Restarts HPDM Gateway.
• Exit—Exits the HPDM Gateway control program, which means the tray icon will no longer be shown.