Safety and Regulatory Information HP Blade Server bh3710 Regulatory Model: RSVLA-0103-DC First Edition E0402
Notice Hewlett-Packard makes no warranty of any kind with regard to this material, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Hewlett-Packard.
HP Blade Server bh3710 Safety and Regulatory Information HP Blade Server bh3710 Safety and Regulatory Information Notational Conventions WARNING Warnings highlight procedures or information necessary to avoid injury to personnel. The warning shall tell the reader exactly what will result from what actions and how to avoid them. CAUTION A caution highlights procedures or information necessary to avoid damage to equipment, damage to software, loss of data, or invalid test results.
HP Blade Server bh3710 Safety and Regulatory Information Lithium Battery Warning Cabinet Safety Precautions Declaration of Conformity FCC Statement (USA Only) Canada RFI Statement European Union RFI Statement Acoustics (Germany) Australian C-Tick Label Laser Safety Product Information For detailed information on the HP Blade Server bh3710 product, please go to the http://docs.hp.com Web site (in the Systems Hardware selection).
HP Blade Server bh3710 Safety and Regulatory Information International Symbols (IEC 417) Figure 1 Protective Earth (ground) Figure 2 Direct Current Figure 3 Alternating Current Figure 4 On (Supply) Figure 5 Off (Supply) English 5
HP Blade Server bh3710 Safety and Regulatory Information Associated Documents The following documents provide more details on the topics presented in this manual: • Standard for the Protection of Electronic Computer Data Processing Equipment, (NFPA75) National Fire Protection Association • EIA Standard RS-232-C, Electronic Industries Association • Electrostatic Discharge Failures of Semiconductor Devices, Unger, B.A.
HP Blade Server bh3710 Safety and Regulatory Information Cabinet Safety Precautions WARNING Cabinets are heavy even when empty. Exercise caution when moving cabinets whether equipment is installed in the cabinet or not. Avoid rolling cabinets on rough or uneven surfaces or inclines greater than 10 degrees. Unloading cabinets from the pallet and movement of cabinets should be performed by at least two people.
HP Blade Server bh3710 Safety and Regulatory Information Procedimentos de Segurança - Armários ATENÇÃO Os armários são pesados, mesmo quando vazios. Tenha cuidado ao movimentar os armários, quer haja equipamentos instalados quer não. Evite deslizar os armários sobre superficies acidentadas, irregulares ou com inclinação superior a 10 graus. A retirada dos armários do palete e sua movimentação deverão ser feitas por, no mínimo, duas pessoas.
HP Blade Server bh3710 Safety and Regulatory Information Säkerhetsföreskrifter för kabinett VARNING Kabinetten är tunga även när de är tomma. Var försiktig när du flyttar ett kabinett, oavsett om det är tomt eller innehåller utrustning. Undvik att rulla kabinett på ett underlag som är ojämnt eller lutar mer än 10 grader. Det krävs minst två personer för att lasta av ett kabinett från transportpallen eller för att flytta det.
HP Blade Server bh3710 Safety and Regulatory Information Voorzorgsmaatregelen voor de veiligheid voor kasten WAARSCHUWING Kasten zijn zwaar, ook als deze leeg zijn. Ga voorzichtig te werk als u een kast verplaatst, of er nu wel of niet apparatuur in de kast is geïnstalleerd. Rol kasten niet over ruwe of ongelijke oppervlakken of hellingen van meer dan 10 graden. Als u een kast van een pallet moet afhalen of moet verplaatsen, doet u dat dan altijd met twee personen.
HP Blade Server bh3710 Safety and Regulatory Information Sikkerhedsforanstaltninger for skabe ADVARSEL Skabene er tunge, selv når de er tomme. Vær forsigtig når De flytter skabe, hvad enten der er installeret udstyr i skabet eller ej. Undgå at rulle skabe på ru eller ujævne overflader eller skråninger der hælder mere end 10 grader. Der skal mindst to personer til at aflæsse skabe fra pallen og til at flytte skabe. ADVARSEL Udtræksdele må ikke være trukket ud, når skabet står på forsendelsespallen.
HP Blade Server bh3710 Safety and Regulatory Information Sikkerhetsforanstaltninger for skapene ADVARSEL Skapene er tunge, selv når de er tomme. Vær forsiktig når du flytter skap, uansett om de er tomme eller inneholder utstyr. Ikke rull skap på ru eller ujevne overflater eller i skråninger som heller mer enn 10 grader. Det trengs minst to personer til lessing av skap fra pallen og til flytting av skap.
HP Blade Server bh3710 Safety and Regulatory Information Laitekaappia koskeva turvavaroitus VAROITUS Kaapit ovat tyhjinäkin painavia. Ole varovainen siirtäessäsi kaappia siitä riippumatta, onko siihen asennettu laitteistoa. Älä rullaa kaappeja karkeilla tai epätasaisilla pinnoilla tai jos pinnan kaltevuus ylittää 10 astetta. Kaappien ottamiseen alas lastausalustalta ja niiden siirtämiseen tarvitaan ainakin kaksi henkilöä.
HP Blade Server bh3710 Safety and Regulatory Information 14 English
HP Blade Server bh3710 Safety and Regulatory Information Declaration of Conformity DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45014 Manufacturer's Name: Hewlett-Packard Company Internet & Applications Systems Division Manufacturer's Address: 8000 Foothills Blvd.
HP Blade Server bh3710 Safety and Regulatory Information FCC Statement (USA Only) The United States Federal Communications Commission has specified that the following notice be brought to the attention of users of this product: NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules.
HP Blade Server bh3710 Safety and Regulatory Information Laser Safety NOTE If a Fibre Channel I/O card is present, the following laser safety statement applies. This product contains a laser internal to the Optical Link Module (OLM) for connection to the Fibre communications port. In the USA, the OLM is certified as a Class 1 laser product conforming to the requirements contained in the Department of Health and Human Services (DHHS) regulation 21 CFR, Subchapter J.
HP Blade Server bh3710 Safety and Regulatory Information 18 English
